According to foreign media reports, SKF introduced a new explorer high-speed single row angular contact ball bearing, its excellent performance, durable, for the screw compressor, pump and the gearbox of the designers and operators to provide many benefits, help to improve product reliability and energy efficiency, thus reduce the total cost of ownership of the device

Compared with the preceding paragraph, copper cage after a new design of the device, improve the effect of noise reduction, damping, more durable, the new bearing contact Angle of 40 degrees, the speed limit will be increased sharply to 30%.

The bearing adopted new cage shape, also adopted a more solid brass material, in reducing the cage of contact pressure at the same time improve the strength, to ensure that has a high resistance to impact load and vibration tolerance.

At the same time, the bearing can greatly improve its speed performance under bad working conditions.

In addition, SKF also provides high speed single-row angular contact ball bearings with a 25 degree contact Angle.

Compared with the bearing with the contact Angle of 40 degrees, its speed is increased by 20% and the radial load is higher.

In all cases, the contact arrangement of the ball to the bracket makes the operating temperature lower, the temperature stability is better, and the noise and vibration level of the above two products are reduced by 15%.

This kind of bearing provides many kinds of seals, which can be used to maintain the more difficult application, and prevent the contamination from entering the bearing interior during installation and later operation.

SKF of the high-speed single row angular contact ball bearing products provide two contact Angle device, the contact Angle of 40 degrees respectively and 25 degrees, which can be used as a back-up bearing the products mentioned in the preceding paragraph, ascend to a higher axial load applied to robustness, prolong its service life.

The company has benefited from many years of research and development and professional knowledge in bearings, tribology, metallurgy, lubricating oil and mechanical technology.

For screw compressor, pump and the gearbox of the designers and operators, the new version of 40 degrees and 25 degrees SKF explorer single row angular contact ball bearing products is a good choice, helps to achieve low operating temperature, improve energy efficiency and prolong the service life of bearing and so on many requirements, to make their products stand out in numerous competition on hands.